MTB Service
Öhlins USA services are performed by our highly experienced and factory trained technicians to factory service standards to ensure the best suspension performance.
ALL SERVICE AND REPAIR
- The product will be partially, or fully disassembled to inspect components for wear depending on which service is requested.
- Measurements will be taken to verify tolerances meet factory specifications.
- Extended service intervals can lead to damaged parts and/or premature wear.
Not included:
- Replacement of worn or damaged parts such as lowers, stanchions, CSU, etc.
- An updated estimate will be provided for approval if expected costs exceed 15% of the original estimate, or customer approved cost.
Please note: A $50 fee will be charged for each item if service and/or repairs are declined. Suspension may be disassembled for inspection/estimate.
Front Fork Service
Service intervals: In order to keep your fork operating at peak performance, Öhlins recommends service every 50 hours. If your item sees heavy use and/or infrequent service, or if it is not functioning properly, odds are, it will likely need at least 100hr/ Factory Service.
50 Hour service
- Replace bath oil
- Clean lowers, replace foam rings, scraper seals, bump rubbers
100 Hour Factory Service
- Replace bath oil
- Clean lowers, replace foam rings, scraper seals, bump rubbers
- Damper rebuild
- Air spring service (replacement of specified wear items)
- The product will be re-assembled, filled with Öhlins specified oil to ensure factory quality, functionality and performance
200 + Hour Service/Full Factory Service
The 200+ hr service may be needed when the suspension does not get regular service, or it is no longer functioning properly.
- Replace bath oil
- Clean lowers, replace foam rings, scraper seals, bump rubbers
- Damper rebuild
- Air spring rebuild (replacement of all wear items)
- The product will be re-assembled, filled with Öhlins specified oil to ensure factory quality, functionality and performance
Rear Shock Service
Service intervals: In order to keep your rear shock operating at peak performance, Öhlins recommends service every 50 hours. If your rear shock sees heavy use and/or infrequent service, or if it is not functioning properly, odds are, it will likely need at least 100hr/ Factory Service.
50 Hour Service
- Complete air can overhaul (air shocks only)
100 Hour Factory Service
- Replace damper oil
- Clean disassembled parts and replace specified seals
- Air sleeve full rebuild (air shocks only)
- The product will be re-assembled, vacuum filled with Öhlins specified oil and dyno checked to ensure factory quality, functionality and performance
200 + Hour Service/Full Factory Service
The 200 + hr service may be needed when the suspension does not get regular service, or it is no longer functioning properly.
- Replace damper oil
- Clean all parts and replace all seals
- Air sleeve full rebuild (air shocks only)
- The product will be re-assembled, vacuum filled with Öhlins specified oil and dyno checked to ensure factory quality, functionality and performance
ÖHLINS Mountain Bike Factory Service Pricing
(rates below include labor, oil and standard wear items)
| FORKS and CARTRIDGES | 50 Hour Service | 100 Hour Service | 200+ Hour Service |
| All Forks | $90 - $105 | $190 - $215 | $275 - $300 |
| DH Cartridge ONLY Service | N/A | $90 | $125 |
| SHOCKS | |||
| STX 22 Air | $95 | $165 | $165 |
| TTX 22 Coil/M | N/A | $175 | $220 |
| TTX Air | $105 | $160 | $210 |
| Re-valve fork or shock while in service (excludes 50 hour service) - $40 |
| Re-valve fork or shock without service - $100 |
Please fill out the form below to begin the service process. Once you click submit, you will receive an email with further instructions and shipping details.
