FGMTB 3616 2061 RXF36 m.2 Trail Fork

38mm offset


The race proven TTX 18 dampening from the DH38 Race Fork has been reworked to give optimal traction and control on trails and Enduro race courses. The TTX 18 cartridge kit featuring trail-optimized 18 mm piston for improved small bump sensitivity. With increased damping pressure bandwidth the damping valve response and sensitivity has improved.

The adjustment range specifically for trail to Enduro race use with 15 clicks of low speed compression and low speed rebound. For high speed compression you get 3 clicks plus a climb mode setting. Retuned twin piston three chamber air spring system allowing total air spring tuning from the initial movement through to the bottom out.

Improved tire clearance, the chassis will take up to a whopping 29×2.8 and 27.5+ x 3.2. There are many technical improvements in the fork but we did not stop there, the design has also been updated and matches what you see on the race courses.


Air: travel 150-180 mm

Independent spring system

Independent damper system

Retuned air spring system

36 mm upper tube diameter

Offset 51 mm or 44 mm

Compatible maximum tire sizes 29x2.8 / 27.5+ x 3.2

Prepared for mudguard

Race proven setting bank

Overall improvements for reducing friction

Select Bike

Mountain Bike Fork Service

We perform service on everything we sell.  Additionally, many of our dealers perform routine maintainance services.

  Recommended Service Interval Typical Labor
Lower Fork Service 50 hours of riding $100
Full Damper Service 100 hours of riding $150

Learn More Find Dealer Service

36mm Seal Kit

Seal Kit for all 36mm forks. Includes:
4x rubber bumpers
2x foam rings
2x wiper seals
1x O-ring (as sag indicator)



Replacement Axle

Replacement Axle for all 36mm forks. boost spacing (110mm).



Have a question?



What are you interested in?

Please enter your email address and select the newsletters you would like to receive.

Error Message